Sunday, July 12, 2009

HWID for Nuvi 760

There has been many emails about conversion of 760 to local version.

So far, what we found out is that it can't be done.

The HWID is for the local 760 is 905. You guys can test it out.

9 comments:

  1. Great news!
    After I modified the Sing/Mal RGN file,
    Use Garmin Updater, success to load the Sgmy v2.40 firmware into Nuvi 760 Taiwan version.
    everything is OK. Lane assist & junction view show when simulator with CNNT SG/MY v4.02

    ReplyDelete
  2. No only Nuvi 760 can do,
    Now Nuvi 205W also can convert it To Nuvi 2W series, then convert again to SgMy firmware, and finally success to make Nuvi 205W US or Taiwan version to use full feature of SgMY firmware. Now my Nuvi205W taiwan can display SgMy JCV. enjoy everybody.

    ReplyDelete
  3. Hi James, so you managed to convert a 205W TW set to see JV or 760 also can?

    ReplyDelete
  4. Yes, Nuvi 205W has already succeed to do. One of my friend has already post the step at www.malfreemaps.com. please refer there. for Nuvi 760, only succeed on taiwan version, but ROM checksum failed. Need to check it out. US version still under in progess.

    ReplyDelete
  5. james,

    can i convert 760 us into 760 taiwan and then into 760mysing

    ReplyDelete
  6. James can you share with us on how to convert 760 taiwan version to sin/my to obtain junction view. thanks

    ReplyDelete
  7. This quide is for mainboard version S2 and S3 ONLY !!! This does not work with mainboard version S4, you'll end with white screen !!!!! And USB periodically restarted after connect to PC USB port. !!!!! PERSONAL EXPERIENCE

    ReplyDelete
  8. https://garmingpsmapsupdate.blogspot.com/2018/02/a-peep-sneak-in-benefits-of-customer-service-gramin-gps-accessories.html?showComment=1567847209253#c4473572414200138888

    ReplyDelete

Website counter

Followers